Rotary Indexers
The Models 396/398/399/391 electron beam source (e-gun) rotary (turret) indexers provides either manual or PLC selection of up to 30 pockets, and continuous or retrograde (banana pocket) operation with speed control.
● Color LCD touch screen for graphical and numerical display, providing an intuitive and user friendly operator interface
● Material names can be displayed on the screen
● Can index up to 30 pockets
● Designed for E-beam sources with 4:1 gear ratio (except for the 396-5. It is a 10:1 ratio for the model 221/224 side drive)
● Automatic recover from pocket jams by reversing and approaching from the opposite direction
● No clutch needed for pocket jams due to automatic motor current sensing
● Includes Rotary, Banana and Continuous modes.
● Automatically rotates the shortest distance to the desired pocket
● Mounts available for 1 inch bolt, 1.25 inch bolt, and 2-3/4” CFF”
● RS-232
● Speed control from 0.25 to 5 rpm
● Remote pocket selected by optically isolated inputs, up to 6 direct and up to 30 binary (software selectable active or passive)
● Relay isolated outputs In position up to 6 pockets directly and up to 30 pockets using binary, Mode signal and General In position signal
● Input can be used to force remote mode
Optional In-vacuum in-pocket Switch
Optional in-vacuum in-pocket confirmation kits are available for Telemark models 244, 246, 264, 264, 271, 274, 276, 277, 294 and 295. When installed and enabled from the touch screen, the software will check that the crucible is in-pocket and count the number of pockets it goes past.
| Model 399 | Model 396/398 | Model 391 | |
|---|---|---|---|
| Number of pockets | 4 to 30 | 4 to 30 | 4 to 30 |
| Controller dimensions | 19 inch rack 2U, 3 1/2” high x 9 3/8” deep | 19 inch rack 2U, 3 1/2” high x 9 3/8” deep | 19 inch rack 2U, 3 1/2” high x 9 3/8” deep |
| Motor Assembly Dimensions | 6.40” (163mm) x 4.60” (117mm) x 2.50” (64mm) | 7.98” (203mm) x 4.60” (117mm) x 2.50” (64mm) | 10.84” (276mm) x 4.60” (117mm) x 2.50” (64mm) |
| RS-232 |  | | |
| Inputs | 8 optically isolated, active (4 to 24V DC or AC), or passive (contact closure) | 8 optically isolated, active (4 to 24V DC or AC), or passive (contact closure) | 8 optically isolated, active (4 to 24V DC or AC), or passive (contact closure) |
| Outputs | 8 relay contacts NO/NC @ max 1A, 24V DC or AC | 8 relay contacts NO/NC @ max 1A, 24V DC or AC | 8 relay contacts NO/NC @ max 1A, 24V DC or AC |
| Power | Input 90-260VAC, 50-60 Hz | Input 90-260VAC, 50-60 Hz | Input 90-260VAC, 50-60 Hz |
| Model 396-05 | Model 396-01 | Model 396-02 | Model 398-01 | Model 398-02 | Model 399-01 | Model 391-01 | |
|---|---|---|---|---|---|---|---|
| Model 221/224 (side drive) Ebeam Souce | | - | - | - | - | - | - |
| Model 244 Ebeam Souce and 221/224 (bottom drive) | - | | - | - | - | - | - |
| Model 246 Ebeam Source | - | - | | - | - | - | - |
| Model 264/274/285/287/294 Ebeam Sources | - | - | - | | - | - | - |
| Model 266/276/279/296/299 Ebeam Sources | - | - | - | - | | - | - |
| Model 287/295 Ebeam Source | - | - | - | - | - | | - |
| Model 298 Ebeam Source | - | - | - | - | - | - | |
Contact Telemark for best indexer model to use for other manufactures e-beam sources.