Feedthroughs

Telemark Feedthroughs

Telemark offers a broad range of standard and custom magnetic fluid feedthroughs for ebeam sources (e-guns). Also offered are high voltage, dual water, rotary and octal instrument feedthroughs in the one inch and 32mm O-ring sealed bolt type, and in the 2-3/4″ CF metal seal type. Water flow switches are also available and recommended.

  1″ (25mm) 1 1/4” (32mm) Description
 O-Ring Feedthroughs 275-0001-1 275-0001-2 High voltage feedthrough
275-0002-1 275-0002-2 Rotary 1/4″ feedthrough
275-0003-1 275-0003-2 Dual 3/8″ water feedthrough
275-0006-1 275-0006-2 Right angle rotary feedthrough
275-0008-1 275-0008-2 8-Pin Instrument feedthrough, octal
275-0017-1 275-0017-2 Feedthrough blankoff
O-Ring Feedthrough Kits 275-0703-1 275-0703-2 Bottom drive FT kit: 2HV, 1 water,1 octal,1 rotary
275-0704-1 275-0704-2 Side drive FT kit: 2HV, 1 water, 1 octal, 1 right angle rotary
  275-0705-1 275-0705-2 Basic feedthru kit: 2HV, 1 water, 1 octal
Ferro Feedthroughs: 1 inch bolt  275-0012-1 1/4″ rotary feedthrough
275-0016-1 Right angle rotary feedthrough

 

2.75″ CFF Description
Metal Seal Feedthroughs:
2.75″ CFF
275-0001-3 High voltage feedthrough
275-0002-3 Rotary 1/4″ feedthrough
275-0003-3 Dual 3/8″ water feedthrough
  275-0008-3 8-Pin Instrument feedthrough, Octal
  275-0017-3 Feedthrough blank-off, 2.75” CFF
  275-0019-1 Dual pass high voltage feedthrough, 10kV
Metal Seal Feedthrough Kits: 2.75″ CFF  275-0703-3 Bottom drive feedthrough kit: 2HV,1 water,1 octal,1 rotary
275-0705-3 Basic feedthrough kit: 2 HV, 1 water, 1 octal

 

HV Feedthrough Cover 275-0210-3 Set of 2 for 1″ o-ring feedthroughs with interlock switch
275-0210-4 Set of 2 for 32mm o-ring feedthroughs
275-0211-2 Set of 2 for 2.75″ CFF feedthroughs
  275-0212-2 Single cover for 2.75″ CFF dual pass feedthrough
Water Flow Switch 271-0831-1 Adjustable water flow switch, 110VAC